Working Temperature is the warranty range of ambient temperature in operation according to the specification of power supply. The temperature value is provided as the power supply is horizontally placed in no wind. No other option is accepted in installing except the above. Concerning power supplies with built-in fan for forced air cooling inside, the value indicates the temperature of flesh air. The service life of power supply could be shortened by half whenever the temperature increases by 10 degrees. As long as you use the power supply with the lowest-level of temperature, you can extend service life of the equipment.
Technical Terms
Working Temperature
Technical Terms
Category
- Power Supplies
- 4-Quadrant
- Arc Protection
- Arc discharge
- Calibration
- Capacitance
- Common
- Constant Current (CC)
- Constant Voltage (CV)
- Continuous Short-circuit Protection
- Cut off
- Drift
- Efficiency
- Electromagnetic Compatibility (EMC)
- Equivalent circuit
- Floating
- Ground (elec.)
- Heat Dissipation (Cooling techniques)
- Impedance
- Input Current
- Input Power
- Input Voltage
- Inrush Current
- Insulation resistance
- Intermittent Short-circuit Protection
- Isolation
- leakage Current
- Line Regulation
- Load Regulation
- Over Current Protection (OCP)
- Over Voltage Protection (OVP)
- Overload Protection
- peak-to-peak
- Power factor
- Pulse
- Ramp
- Rating
- Relative humidity
- Remote Controlling
- Ripple
- Ripple Noise
- Root Mean Square (RMS)
- Rush current
- Sequence Control
- Short-circuit Protection
- Slew Rate
- Storage Temperature
- Temperature coefficient
- Typical (Typical Value)
- Voltage Droop
- Withstand Voltage
- Working Temperature
- Digital Control Programming
- X-ray
- Computed Tomography (CT)
- Laser