Search waiting | Matsusada Precision

Searching...

  • TC series | High Voltage power supply PCB Mount (On-board) | Matsusada Precision
  • TC series | High Voltage power supply PCB Mount (On-board) | Matsusada Precision

ULTRA-COMPACT PCB MOUNTABLE HIGH VOLTAGE POWER SUPPLY

  • 1kVdc to 2kVdc
    0.7mA to 1.5mA
    1.5W
  • Ultra-compact mark
    Ultra compact
  • Low-ripple mark
    Low ripple
  • ul_certified mark CE mark

The Suitable Power Supply for Bringing Out the Best in Photomultiplier Tubes

Established over 40 years ago as a manufacturer of high voltage power supplies, Matsusada Precision provides TC series utilizing the expertise and know-how. The TC series features low noise and high stability, ensuring the highest performance of Photomultiplier Tubes (PMTs). It also offers high-voltage solutions to drive Microchannel Plates (MCPs).

FEATURES

  • Ultra-compact, PCB mountable
  • Ultra-low ripple 5 mVp-p minimum (1 kV output model)
  • Wide range of output voltage (available with continuously variable 0V output)
  • High-performance with an ultra-compact size
  • Variable with volume control or external control voltage
  • Enhanced protection circuit (continuous short-circuit is possible)
  • UL62368-1 approved
  • CE marking approved (low voltage directive)

APPLICATIONS

Models

Positive polarity output
Model *1 Output Ripple [mVp-p] Input Voltage [Vdc] Safety standards
Voltage [Vdc] Current [mA] Minimum Load *2
TC-1P-12 0 to +1 kV 1.5 mA 0.35 MΩ 5 mVp-p 12 V ul_certified mark ce mark
TC-1P-15 15 V
TC-1.5P-12 0 to +1.5 kV 1 mA 0.75 MΩ 7 mVp-p 12 V
TC-1.5P-15 15 V
TC-2P-12 0 to +2 kV 0.7 mA 1.5 MΩ 10 mVp-p 12 V
TC-2P-15 15 V
Negative polarity output
Model *1 Output Ripple [mVp-p] Input Voltage [Vdc] Safety standards
Voltage [Vdc] Current [mA] Minimum Load *2
TC-1N-12 0 to -1 kV 1.5 mA 0.35 MΩ 5 mVp-p 12 V ul_certified mark ce mark
TC-1N-15 15 V
TC-1.5N-12 0 to -1.5 kV 1 mA 0.75 MΩ 7 mVp-p 12 V
TC-1.5N-15 15 V
TC-2N-12 0 to -2 kV 0.7 mA 1.5 MΩ 10 mVp-p 12 V
TC-2N-15 15 V
  1. To order 12 Vdc input type, enter "12", or to order 15 Vdc input type, enter "15". <Example> TC-1.5P-12
  2. Rated output current cannot be drawn at a low output voltage range (output current × minimum load). Use a larger than minimum load.

Specifications

For details, download the datasheet below.

Options

LS

External output ON/OFF
Enable to high voltage ON/OFF with contact signal.
When use open collector [ON ≤ 0.3 V (Low), OFF ≥ 2 V (High)]

How to Order

Add LS to Model No.
<Example> TC-1.5N-15LS

Diagram

Connection Diagram

For details, download the datasheet below.

Dimensions

For details, download the datasheet below.

Download

If you are unable to download a file

Please try the following solution.

  1. Please press Ctrl+F5 to clear the cache of your web browser and try again.
  2. Please restart your web browser and log in again to try again.
  3. Please change your web browser to another browser and try again.
  4. Restart the computer and try again.
  5. Please try again on a different computer.

Login Required

New account

Log in

In this website, we provide only the latest version of information including instruction manuals as of our products. Therefore, the newest versions of manuals on the website might be not same as the ones of products you purchased in the past.

Information on related articles in Technical Knowledge

Similar products

Products to be used in combination

High Voltage power supplies (Chassis mount/PCB mount)

Search for related to High Voltage power supplies (Chassis mount/PCB mount)

Category